BMS APU08E Owner'S Manual Download Page 120

Page: 120 / 158

120

Valve Adjustment

See an authorized ODES dealer for valve

adjustment.

Insufficient clearance will cause loss of

power and possibly damage the valves.

Excessive clearance will cause noise.

Spark Arrester

The muffler must be periodically purged of

accumulated carbon.

WARNING

！

Never run engine in an enclosed area.

Never

perform

this

operation

immediately after the engine has been

run because exhaust system is very

hot. Make sure that there are no

combustible materials in the area. Wear

eye protection and gloves. Never stand

behind the vehicle while purging

exhaust system. Respect all applicable

laws and regulations.

Select a well-ventilated area and make

sure the muffler is cool.

Place transmission on PARK position.

Remove the cleanout plug of the muffler.

Block the end of the muffler with a shop rag

and start engine.

Momentarily increase engine RPM several

times to purge accumulated carbon out of

the muffler.

Stop engine and allow muffler to cool.

Reinstall the cleanout plug.

Radiator

Periodically check the radiator area for

Summary of Contents for APU08E































































































































































Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands

BMS APU08E, Owner'S Manual

Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands