BMS APU08E Owner'S Manual Download Page 67

Page: 67 / 158

Seat belts

Make sure that both seat belts are not

frayed or damaged.

The seat belt must move smoothly when

pulled. The latch plate should click

securely into the buckle and release

when the release button is pushed firmly.

Wash off any dirt or mud which could

affect operation. Have an dealer repair

as necessary for proper operation.

Steering

Park on level ground. Turn the steering

wheel right and left. Check for excessive

free play, abnormal noises, or a rough

! WARNING

POTENTIAL HAZARD

Improper care when refueling.

WHAT CAN HAPPEN

Fuel can spill, which can cause a fire

and severe injury.

Fuel expands when it heats up.

If the fuel tank is overfilled, fuel could

spill out due to heat from the engine or

the sun.

HOW TO AVOID THE HAZARD

Do not overfill the fuel tank. Be careful

not to spill fuel, especially on the

engine or exhaust pipe. Wipe up any

spilled fuel immediately. Be sure the

fuel tank cap is closed securely.

Summary of Contents for APU08E































































































































































Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands

BMS APU08E, Owner'S Manual

Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands