BMS APU08E Owner'S Manual Download Page 110

Page: 110 / 158

110

Engine use and maintenance

! WARNING

●

Without the reasonable

training,the improper operation
may cause injury,death and engine
damage.

●

The improper installation and

operation will cause injury, death
and engine damage.

●

Because of the high,temperature

Engine is strictly prohibited to touch
without any protective measure.

●

To Avoid the injury and engine

damage,should take some proective
measures when making assembly or
using the engine ratation parts.

●

No maintenance or use the engine

in a closed room.

●

No repair the engine in the

roadside,it could cause a fair.

●

Do not make modification on the

engine or its parts., it will resault in
the human injury ,engine damage
and warranty terminated.

●

exhaust gas which from the engine

exhaust pipe may lead to cancer,
death, or other unknown physical
injuries

Summary of Contents for APU08E































































































































































Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands

BMS APU08E, Owner'S Manual

Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands