BMS APU08E Owner'S Manual Download Page 119

Page: 119 / 158

119

engine is calibrated to operate specifically

with these components.

Remove access panel.

Loosen clamp and remove air filter.

1. Clamp

2. Air filter

Cleaning

Pour cleaning solution or an equivalent into

a bucket. Put the filter in to soak.

While filter soaks, clean inside the air filter

housing.

Rinse the filter with warm water until all

cleaning solution disappears.

Then, let the filter dry completely.

Installation

Properly reinstall removed parts in the

everse order of their removal.

Drive Belt

See and authorized ODES dealer to check

the width and the condition of drive belt.

CVT Cover Drain Screw

Any time you suspect that water has

entered the CVT cover, drain the CVT

housing by removing the drain screw.

Summary of Contents for APU08E































































































































































Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands

BMS APU08E, Owner'S Manual

Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands