BMS APU08E Owner'S Manual Download Page 79

Page: 79 / 158

A heavier vehicle takes longer to stop.

●

Avoid making sharp turns unless at

very slow speeds.

●

Avoid hills and rough terrain. Choose

terrain carefully. Added weight affects

the stability and handling of the vehicle.

! WARNING

POTENTIAL HAZARD

Overloading this vehicle or carrying or
towing cargo improperly.

WHAT CAN HAPPEN

Could cause changes in vehicle
handling which could lead to an
accident.

HOW TO AVOID THE HAZARD

Never exceed the stated load
capacity for this vehicle.
Cargo should be properly distributed
and securely attached.
Reduce speed when carrying cargo
or pulling a trailer. Allow greater
distance for braking.

DRIVING YOUR VEHICLE

GETTING TO KNOW YOUR VEHICLE

Summary of Contents for APU08E































































































































































Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands

BMS APU08E, Owner'S Manual

Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands