BMS APU08E Owner'S Manual Download Page 135

Page: 135 / 158

135

4. Once the majority of the dirt has been

hosed off, wash all surfaces with warm

water and mild, detergent- type soap.

An old toothbrush or bottle brush is

handy for hard-to-get-at places.

5. Rinse the vehicle off immediately with

clean water and dry all surfaces with a

chamois, clean towel or soft absorbent

cloth.

6. Clean the seats with a vinyl

upholstery cleaner to keep the cover

pliable and glossy.

7. Automotive type wax may be applied

to all painted and chrome plated

surfaces. Avoid combination

cleaner-waxes. Many contain abrasives

which may scratch the paint or

protective finish. When finished, start

the engine and let it idle for several

minutes.

! WARNING

POTENTIAL HAZARD

Operation with wet brakes after
washing.

WHAT CAN HAPPEN

Wet brakes may have reduced
stopping ability, increasing the
chance of an accident.

HOW TO AVOID THE HAZARD

Summary of Contents for APU08E































































































































































Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands

BMS APU08E, Owner'S Manual

Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands