BMS APU08E Owner'S Manual Download Page 137

Page: 137 / 158

137

Ground the spark plug wire and turn

the engine over several times to coat

the cylinder wall with oil.

3. Lubricate all control cables.

4. Block up the frame to raise all

wheels off the ground.

5. Tie a plastic bag over the exhaust

pipe outlet to prevent moisture from

entering.

6. If storing in a humid or salt-air

atmosphere, coat all exposed metal

surfaces with a light film of oil. Do

not apply oil to any rubber parts or

the seat covers.

7. Remove the battery and charge it.

Store it in a dry place and recharge it

once a month. Do not store the

battery in an excessively warm or cold

place (less than 0

℃

(30

℉

) of move

than 30

℃

( 90

℉

)).

NOTE :

Make any necessary repairs before

storing the vehicle.

Summary of Contents for APU08E































































































































































Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands

BMS APU08E, Owner'S Manual

Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands