BMS APU08E Owner'S Manual Download Page 59

Page: 59 / 158

Keep hands and feet on controls

Always keep both hands on the steering

wheel and both feet on controls. When

driving your UTV, it is important to

maintain your balance and control of the

UTV. Removing hands or feet away

from the controls can reduce your ability

to react and control the off highway

recreational vehicle.

! WARNING

Operating this UTV on paced surfaces

may seriously affect handling and

control of the UTV, and may cause the

vehicle to go out of control.

Never operate the on any paved

surfaces,

including

sidewalks,

Operating this UTV on paced surfaces

may seriously affect handling and

control of the UTV, and may cause the

vehicle to go out of control.

Never operate the on any paved

surfaces,

including

sidewalks,

driveways, parking lots and strata.

Summary of Contents for APU08E































































































































































Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands

BMS APU08E, Owner'S Manual

Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands