BMS APU08E Owner'S Manual Download Page 80

Page: 80 / 158

This off-highway utility vehicle will

handle and maneuver differently from

an ordinary passenger car or other

vehicle.

Before you begin to use your vehicle, be
sure you have read this Owner’s Manual
completely and understand the

operation of the controls. Please also

read all caution and warning labels on

your vehicle.

This vehicle is designed for the operator

and one passenger. The driver and

passenger must always wear a seat belt.

Never carry passengers in the cargo

bed.

! WARNING

POTENTIAL HAZARD

Not wearing the seat belt.

Wearing the seat belt improperly.

WHAT CAN HAPPEN

There is increased risk of being

killed or seriously injured in an

accident.

HOW TO AVOID THE HAZARD

Always wear your seat belt when

riding in the vehicle.

Be sure the seat belt is close-fitting

across your hips and chest and is

latched securely.

Summary of Contents for APU08E































































































































































Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands

BMS APU08E, Owner'S Manual

Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands