BMS APU08E Owner'S Manual Download Page 155

Page: 155 / 158

155

or implied warranty or any other contract, negligence or other tort or otherwise.

No express emission control system warranty is given by the Distributor except as

specifically set forth herein. Any emission control system warranty implied by law,

including any warranty of merchant ability or fitness for a particular purpose is limited

to the express emission control system warranty terms stated in this warranty. The

foregoing statements of warranty are exclusive and in lieu of all other remedies. All

express warranties not stated in this warranty are disclaimed. Some states do not

allow limitations on how long an implied warranty lasts, so the above limitations may

not apply if it is inconsistent with the controlling state law.

No dealer is authorized to modify this Emission Control System Warranty. If you

have any questions regarding your warranty rights and responsibilities, you should

Summary of Contents for APU08E































































































































































Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands

BMS APU08E, Owner'S Manual

Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands