BMS APU08E Owner'S Manual Download Page 105

Page: 105 / 158

105

consult dealer.

CAUTION:
Do not try to remove the sealing
caps of the battery calls. You may
damage the battery.

! WARNING

POTENTIAL HAZARD

Failure to handle batteries or battery

electrolyte carefully.

WHAT CAN HAPPEN

You could be poisoned. You could

be severely burned by the sulfuric

acid in battery electrolyte. Batteries

produce explosive gases.

HOW TO AVOID THE HAZARD

Avoid contact with skin, eyes or

clothing. Always shield eyes when

working near batteries. Keep out of

reach of children.

Antidote:

EXTERNAL : Flush with water.

INTERNAL : Drink large quantities

of water or milk. Follow with milk of

magnesia, beaten egg or vegetable

oil. Get prompt medical attention.

EYES : Flush with water for 15

minutes and get prompt medical

attention. Keep batteries away from

sparks, flames, Ventilate when

charging or using in a closed space.

Battery maintenance

Summary of Contents for APU08E































































































































































Search results

Summary of Contents for APU08E

Reviews:

BMS APU08E, Owner'S Manual, Page: 105 / 158

Search results

Summary of Contents for APU08E

Reviews: