BMS APU08E Owner'S Manual Download Page 52

Page: 52 / 158

Additional driving gear

In addition to a helmet and eye

protection ,we also recommend:

●

sturdy off-road motorcycle boots to

help protect your feet, ankles, and lower

legs.

●

off-road motorcycle gloves to help

protect your hands.

●

driving pants with knee and hip pads, a

driving jersey with padded elbows,

chest/shoulder protector.

Drive training

Developing your driving skills is an

on-going process. Even if you have

driven other UTVs , take time to become

familiar with hoe this UTV in a safe area

! WARNING

Operating this without wearing an

approved motorcycle helmet, eye

protection and protective clothing

could increase your chances of

head or eye injury, possibly death in

the event of severe accident.

Always wear approved motorcycle

helmet that fits properly and wear

eye

protection(goggle

face

shield), gloves, boots, long-sleeved

shirt or jacket and long pants

Summary of Contents for APU08E































































































































































Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands

BMS APU08E, Owner'S Manual

Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands