BMS APU08E Owner'S Manual Download Page 68

Page: 68 / 158

feeling. Have an dealer repair as

necessary for proper operation.

Fittings and fasteners

Always check the tightness of chassis

fittings and fasteners before a ride. Take

the vehicle to an dealer or refer to the

Service Manual for correct tightening

torque.

Lights

Check the headlights and tail/brake

lights to make sure they are in working

condition. Repair as necessary for

proper operation.

Switches

Check the operation of all switches.
Have an dealer repair as necessary for
proper operation.

Tires

! WARNING

POTENTIAL HAZARD

Operating this vehicle with improper
tires, or with improper or uneven tire
pressure.

WHAT CAN HAPPEN

Use of improper tires on this vehicle,
or operation of this vehicle with
improper or uneven tire pressure,
may cause loss of control, increasing
your risk of

accident.

HOW TO AVOID THE HAZARD

1 The tires should be set to the

recommended pressure:

Summary of Contents for APU08E































































































































































Search results

Summary of Contents for APU08E

Reviews:

BMS APU08E, Owner'S Manual, Page: 68 / 158

Search results

Summary of Contents for APU08E

Reviews: