![background image](http://html.mh-extra.com/html/bms/apu08e/apu08e_owners-manual_2779913072.webp)
72
the battery in the vehicle.
●
Be especially careful not to:
●
touch the positive lead of the jumper
cable to the negative lead.
●
reverse the polarity of the jumper cables
when connecting to the batteries-battery
explosion and/or serious damage to the
electrical system may occur.
5
、
Start the engine.
6
、
After the engine starts, disconnect the
negative lead of the jumper cable
from the vehicle and charged battery,
and then disconnect the positive lead
of the jumper cable from the charged
battery and the battery in the vehicle.
7
、
Install the battery compartment cover.
8
、
Close the hood.
Warming up
To get maximum engine life, always
warm up the engine before starting off.
Never accelerate hard with a cold
engine! To see whether or not the
engine is warm, check if it responds to
the throttle normally with the starter
(choke) turned off.
Shifting: Neutral to Reverse
1. Stop the vehicle. Keep your foot off
the accelerator pedal.
2. Apply the brake pedal.
3. Shift from neutral to reverse or vice
Summary of Contents for APU08E
