BMS APU08E Owner'S Manual Download Page 154

Page: 154 / 158

154

causes beyond the control of the Distributor.

• Failures not caused by a defect in material or workmanship.

Use of the vehicle in any type of competitive racing or related events immediately

and completely voids this and all other warranties.

LIMITED LIABILITY

The liability of the Distributor under this Emission Control System Warranty is

limited solely to the remedying of defects in material workmanship by an authorized

dealer at its place of business during customary business hours. This warranty does

not cover in convenience or loss of use of the vehicle or transportation of the vehicle

to/from the authorized dealer. The Distributor is not liable to any person for incidental,

consequential or special damages of any description, whether arising out of express

Summary of Contents for APU08E































































































































































Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands

BMS APU08E, Owner'S Manual

Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands