BMS APU08E Owner'S Manual Download Page 75

Page: 75 / 158

10-20 hours:

Avoid prolonged operation above 3/4

throttle. Rev the vehicle freely but do not

use full throttle at any time.

After break-in:

The vehicle can now be operated

normally.

Parking

When parking, stop the engine and shift
the drive select lever into the neutral
position. Apply the parking brake to help
prevent the vehicle from rolling.

Parking on a slope

! WARNING

POTENTIAL HAZARD

Parking on a hill or other incline.

WHAT CAN HAPPEN

The vehicle could roll out of control,

increasing the chance of an accident.

HOW TO AVOID THE HAZARD

Avoid parking on hills or other

inclines. If you must park on an

incline, apply the parking brake, and

block the front and rear wheels with

rocks or other objects. Do not park

the vehicle at all no hills that are so

steep you could not walk up them

Summary of Contents for APU08E































































































































































Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands

BMS APU08E, Owner'S Manual

Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands