BMS APU08E Owner'S Manual Download Page 147

Page: 147 / 158

147

、

EMISSION CONTROL SYSTEM WARRANTY

YOUR WARRANTY RIGHTS AND OBLIGATIONS

The emission control system warranty period for this vehicle begins on the date the

vehicle is delivered to the first purchaser other than an authorized dealer, or the date

it is first used as a demonstrator, lease, or company vehicle, which ever comes first

and continues for 60 months after that date, or 10,000 which ever comes first,

provided there has been no abuse, neglector improper maintenance of your vehicle.

Where a warrantable condition exists, the Distributor will repair your vehicle at no

cost to you, including diagnosis, parts and labor. If an emission-related part on your

vehicle is defective, the part will be repaired or replaced by the Distributor. This is

your emission control defects warranty.

Summary of Contents for APU08E































































































































































Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands

BMS APU08E, Owner'S Manual

Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands