BMS APU08E Owner'S Manual Download Page 116

Page: 116 / 158

116

containing

corrosion

inhibitors

specifically for internal combustion
aluminum engine.
Cooling system must be filled with
premixed coolant .
Coolant level

WARNING

！

Check  coolant  level  with
engine  cold.  Never  add
coolant  in  cooling  system
when engine is hot.

Remove access panel.

1. Coolant reservoir

With vehicle on a level surface, liquid

should be between MIN. and MAX. level

marks of coolant reservoir.

NOTE:

When

checking

level

temperature lower than 20

℃

,it may be

lightly lower than MIN. mark. Add coolant

up to MAX. mark if required. Use a funnel

to avoid spillage.

Do not overfill.

Properly reinstall and tighten filler cap and

reinstall access panel.

If the coolant is added in the coolant

reservoir, check the level in the radiator too.

Add coolant if necessary.

WARNING

！

Summary of Contents for APU08E































































































































































Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands

BMS APU08E, Owner'S Manual

Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands