BMS APU08E Owner'S Manual Download Page 71

Page: 71 / 158

If there is a control or function you

do not understand, ask your dealer.

Jump-starting

Jump-starting the vehicle should be

avoided. The battery should be

removed and charged instead. however,

if the vehicle must be jump-started,

proceed as follows.

、

Turn the key to ―OFF‖.

、

Open the hood. Remove the battery

compartment cover.

、

Using a charged 12V battery, connect

the positive lead of the jumper cable to

the positive terminal of the battery in the

vehicle and the

、

Connect the negative lead of the

jumper cable to the negative terminal of

the negative lead to an unpainted metal

surface of the vehicle.

1. Jumper cable positive lead
2. Jumper cable negative lead

! WARNING

Do nor connect the negative lead of the
jumper cable to the negative terminal of

Summary of Contents for APU08E































































































































































Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands

BMS APU08E, Owner'S Manual

Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands