BMS APU08E Owner'S Manual Download Page 136

Page: 136 / 158

136

Test the brakes after washing. Apply
the brakes several times at slow
speeds to let friction dry out the
linings.

STORAGE

Long term storage 60 days or more of

your vehicle will require some

preventive procedures to guard against

deterioration. After thoroughly cleaning

the vehicle, prepare for storage as

follows:

1. Fill the fuel tank with fresh fuel and

add the specified amount of Fuel

Stabilizer and Conditioner or

equivalent product. Operate treated

fuel through the fuel system.

Specified amount:
1 oz of stabilizer to each gallon of fuel
(or 7.5 cc of stabilizer to each liter of fuel)

NOTE :

Use of fuel stabilizer and conditioner

eliminates the need to drain the fuel

system. Consult an dealer if the fuel

system needs to be drained instead.

2. Remove the spark plug, pour about

one tablespoon of SAE 10W30 or

20W40 motor oil in the spark plug.

Summary of Contents for APU08E































































































































































Search results

Summary of Contents for APU08E

Reviews:

BMS APU08E, Owner'S Manual, Page: 136 / 158

Search results

Summary of Contents for APU08E

Reviews: