BMS APU08E Owner'S Manual Download Page 150

Page: 150 / 158

150

Your emission control system warranty covers components whose failure would

increase an engine’s emission, including electronic controls, fuel injection system,

carburetor, the ignition system, catalytic converter, or any other system utilized in

this vehicle to control emission if it is originally equipped. Also included may be

hoses, connectors and other emission-related assemblies. Replacing or repairing

other components (including parts, labor, and other costs) not covered by this

emission control system warranty or the standard warranty is the responsibility of the

owner.

Coverage of repairs under this warranty applies only when repairs are completed at

an authorized dealer or repair facility. The Distributor will not cover repairs performed

outside of an authorized dealer or repair facility, except in an emergency situation.

Summary of Contents for APU08E































































































































































Search results

Summary of Contents for APU08E

Reviews:

BMS APU08E, Owner'S Manual, Page: 150 / 158

Search results

Summary of Contents for APU08E

Reviews: