BMS APU08E Owner'S Manual Download Page 58

Page: 58 / 158

When driving off-road, also remember

to always obey local off-road driving

laws and regulations. Obtain permission

to drive on private property. Avoid

posted areas and obey

―no trespassing‖

signs.

You should never drive your UTV on

public streets, roads or highways, even

if they are not paved. Drivers of street

vehicles may have difficulty seeing and

avoiding you, which could lead to a

collision. In many states it is illegal to

operate UTV on public streets, roads

and highways.

! WARNING

Operating this UTV on paced surfaces

may seriously affect handling and

control of the UTV, and may cause the

vehicle to go out of control

Never operate the on any paved

surfaces,

including

sidewalks,

driveways, parking lots and strata.

Summary of Contents for APU08E































































































































































Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands

BMS APU08E, Owner'S Manual

Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands