BMS APU08E Owner'S Manual Download Page 93

Page: 93 / 158

stop the vehicle where it is safe to do so.

Set the parking brake and get out to

inspect the area thoroughly. Look from

both your approach side and the exit

side. If you believe you can continue

safely, decide the path that will allow

you to a right angle as possible to

minimize vehicle tipping. Go only fast

enough to maintain your momentum but

still give yourself plenty of time to react

to changes in conditions. If there is any

question about your ability to maneuver

safely over the obstacle, you should turn

around, if the ground is flat and have the

room, or back up until you find a less

difficult path.

! WARNING

POTENTIAL HAZARD

mproperly

operating

over

obstacles.

WHAT CAN HAPPEN

Could cause loss of control or a

collision. Could cause the vehicle to

overturn.

HOW TO AVOID THE HAZARD

Before operating in a new area,

check for obstacles.

Summary of Contents for APU08E































































































































































Search results

Summary of Contents for APU08E

Reviews:

BMS APU08E, Owner'S Manual, Page: 93 / 158

Search results

Summary of Contents for APU08E

Reviews: