BMS APU08E Owner'S Manual Download Page 106

Page: 106 / 158

106

1. When the vehicle is not used for

a month or longer, remove the battery

and store it in a cool, dark place.

Completely recharge the battery

before reinstallation.

CAUTION:

The carburetor was set at the

factory after many tests. If the

settings are disturbed by someone

without sufficient technical

knowledge, poor engine

performance and damage may

result.

2. Always make sure the connections

are correct when putting the battery

back in the vehicle.

! WARNING

Do not connect the negative lead

of the jumper cable to the negative

terminal of the battery in the

vehicle.

●

Be especially careful not to:

●

touch the positive lead of the

jumper cable to the negative lead.

●

reverse the polarity of the jumper

cables when connecting to the

batteries-battery explosion and/or

serious damage to the electrical

system may occur.

If a fuse blows

All of the electrical circuits on your

Summary of Contents for APU08E































































































































































Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands

BMS APU08E, Owner'S Manual

Search results

Summary of Contents for APU08E

Reviews:

Related manuals for APU08E

Brands by name

Popular brands