68
SCAN-LAN VI
7. Printing, Uploading, and
Viewing Test Results
The Print function allows you to send test results to a serial printer, upload
the test results to a PC, or view stored test reports before printing or
uploading.
The Print function allows you to: Print some or all of the saved reports,
print the last Traffic Report, delete saved reports, and view saved reports.
7.1 Connecting to a PC or Printer
7.1.1 O
VERVIEW
Connect the single, 9-pin connector end of the PC Interface Cable to the
serial port on the SCAN-LAN VI. Connect one of the connectors on the
other end (use either the 9- or the 25-pin connector) to a printer or PC.
NOTE
Make sure you do not leave the unit connected to the PC while making
measurements. Doing so may cause a Wire Map Fail error to occur.
7.1.2 A
DAPTER
/C
ONNECTOR
I
NFORMATION
The PC Interface Cable (supplied) may not be the correct connector to
properly connect to all serial printers. Use only straight-through adapters
to connect the PC Interface Cable to a printer.
Connectors with different pin assignments than those mentioned above may
affect output operation (see
Chapter 1, Specifications,
for the Serial Port pin
assignments).
7.2 Printing/Uploading Test Results
7.2.1 P
RINTING
/U
PLOADING A
S
INGLE
T
EST
R
EPORT
1. Set dial to PRINT to display the Print menu.
Summary of Contents for SCAN-LAN VI
Page 2: ......
