105
CHAPTER 9: Setup
• Press DEC (F2) to decrease the noise threshold.
• Press INC (F3) to increase the noise threshold.
9.2.4 P
OWER
D
OWN
T
IME
PowerDown sets the time interval for the SCAN-LAN VI’s automatic power-
down. The SCAN-LAN VI will power down after the time interval you select
if there has either been no key press or no communication with the other
end when set to remote mode. To disable PowerDown, set the value to
Disabled.
• Set dial to SETUP.
• Highlight PowerDown using the the arrow keys.
• Press DEC (F2) to shorten the time until power-down.
• Press INC (F3) to lengthen the time until power-down.
CAUTION
Auto power-down is automatically disabled during the Traffic and Noise
tests. Use the AC/Mains adapter to power the SCAN-LAN VI for extended
Traffic or Noise monitoring.
9.2.5 B
ACKLIGHT
T
IME
The BackLight parameter sets the “on” time for the display backlight. The
backlight should be used sparingly, as it reduces the number of operation
hours on a set of batteries or a battery charge.
• Set dial to SETUP.
• Highlight BackLight using the arrow keys.
F1
F2
F3
F4
Summary of Contents for SCAN-LAN VI
Page 2: ......
