124
SCAN-LAN VI
12. Self-Test
If the SCAN-LAN VI fails to operate as expected, or exhibits inaccurate
readings, perform a self-test.
To run a self-test:
1. Set the dial to EXTENDED FUNCTIONS.
2. Press the arrow keys to highlight SELF-TEST.
3. Press ENTER. The test begins immediately and the screen displays the
test results.
If the self-test fails, make a note of which test fails and contact Black Box.
If the SCAN-LAN VI passes the self-test, but still does not perform properly,
perform the calibration procedure (refer to
Chapter 10, Calibration
). If
you continue to experience problems, make a note of the circumstances
and print a cable report, if applicable. Then call Black Box.
You must obtain a Return Material Authorization (RMA) number before
sending the unit in for repair.
Summary of Contents for SCAN-LAN VI
Page 2: ......
