39
CHAPTER 4: Autotest
4. Press PUSH TO TALK (F4) on either the main or remote to talk to the
other person at the other end of the cable.
5. Press the arrow keys to adjust earphone volume up or down.
6. Press ESC to exit TALK mode.
4.5.1 I
NTERACTION OF
T
ALK AND
S
END
F
UNCTIONS
After sending a test result screen to the Remote using the SEND button,
the TALK feature can be activated as shown below, making it easy for the
operators to discuss the result.
1. From an Autotest Summary Screen, send the test-result screen to the
Remote using the SEND button.
2. On the Main unit, press the ESC key to return to the overall Autotest
summary screen.
3. Enter the TALK mode by pressing the TALK button (F4).
4. On both units, a REVIEW (F1) softkey is displayed. Press REVIEW (F1)
to view the test-result screen.
5. Press PUSH TO TALK (F4) to talk to the person at the Remote end.
LinkTalk
F1
F2
F3
F4
PUSH TO
TALK
LISTEN
Volume:
LinkTalk
STOP
RING
F1
F2
F3
F4
PUSH TO
TALK
LISTEN
Volume:
Summary of Contents for SCAN-LAN VI
Page 2: ......
