34
SCAN-LAN VI
4.2.3 D
ETAILED
R
ESULTS
Some test-result screens (for example, the NEXT summary screen) have a
DETAIL softkey that you can press to view more information about the test
results.
1. Press DETAIL (F3) from the Autotest results screen.
2. Press SUMMARY (F3) to return to the test-result SUMMARY screen.
3. Press SAVE (F4) or ENTER at any time to save the Autotest results.
(For a discussion of GRAPH [F2], refer to
Section 6.2.5
.)
4. Press SEND (F1) to send results to the remote unit.
4.3 Viewing 250-MHz Autotest Results
After performing an Autotest, SCAN-LAN will display PASS, FAIL or PASS*, FAIL*.
SCAN-LAN also displays Headroom and Crossover.
Headroom (expressed in Decibels or dB) is based on the worst-case measurement
of Power Sum NEXT relative to the NEXT standard for the cable test chosen.
Crossover value (in MHz) is the frequency at which Power Sum ACR equals zero
(PSNEXT-Attenuation = PSACR).
Two test-summary screens are shown after an Autotest: Link Performance and
Power Sum ACR.
V
IEWING
T
EST
R
ESULTS
1. After completing Autotest, press VIEW (F3) from the Autotest results screen.
2. Press the arrow keys to view additional summary test-result screens (Link
Performance and PSACR are shown after the NEXT results).
F1
F2
F3
F4
Summary of Contents for SCAN-LAN VI
Page 2: ......
