153
APPENDIX D. Cable Replacement Procedure
O
PTIONAL
E
QUIPMENT
• Soldering tools
• Needle-nose pliers.
Figure D-1. Performance Module Disassembly.
D.3 Disassembly
1. Remove the Performance Module from the main body.
CAUTION
Removing the Performance Module exposes static-sensitive electronics
inside the main body. Ground yourself appropriately to avoid damage.
For the steps listed below, refer to Figure D-1.
2. Remove the two
11
⁄
16
inch 4-40 pan-head screws from the Performance
Module with a flat-blade screwdriver.
3. Work the grommet through the hole in the case toward the circuit
board. Move the grommet and the circuit board until both are free
of the case.
4. Make notation of old wire attachments, including color versus
position, number and direction of twists, and approximate lay
in the case.
TIE-WRAP
GROMMET
INSTALLATION JACK SCREW (2)
PCB MOUNT SCREW (2)
THREADED SPACER (2)
PCB
CASE
Summary of Contents for SCAN-LAN VI
Page 2: ......
