20
SCAN-LAN VI
Removing or installing the performance module.
BEWARE OF STATIC ELECTRICITY!
The SCAN-LAN VI contains static-sensitive electronics inside the main
body. Use appropriate precautions when removing and installing
performance modules.
2.3 Battery Information
The SCAN-LAN VI handheld is shipped with 8 AA alkaline batteries per
unit.
Two rechargeable nickel metal hydride (NiMH) battery eliminators are
also included.
A low battery message appears on the LCD screen when it is time to
replace the batteries. When this message appears, you have 60 seconds
to save your test results before the unit automatically powers down.
2.3.1 M
EMORY
S
TORAGE
The SCAN-LAN VI’s memory is powered from an internal, long-life lithium
cell. Stored test results and setup conditions will therefore be saved when
you replace the AA alkaline batteries or rechargeable battery eliminator.
2.3.2 C
HARGING
M
ODE
When the AC/Mains adapter is used and the SCAN-LAN VI is powered
“off,” the unit goes into a “sleep mode.” With the NiMH re-chargeable
battery eliminator installed, the unit goes into a Recharge mode. A fully
discharged battery eliminator will take approximately 10 to 12 hours to
charge to full capacity. To resume testing, press the Power button.
EXTENDED
FUNCTIONS
LENGTH
QUICK
AUT
O
TEST
WIRE MAP
SETUP
CAL
F1
F2
F3
F4
100MHz
NOISE
TRAFFIC
ENTER
ESC
√
Summary of Contents for SCAN-LAN VI
Page 2: ......
