manualshive.com logo in svg

Black Box LES1516A, User Manual

Share
Download
Black Box LES1516A User Manual Download Page 66

66

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 5: SERIAL PORT, HOST DEVICE AND USER CONFIG

5.1.2 CONSOLE SERVER MODE 

Š

Š

Select Console Server Mode to enable remote management access to the serial console that is attached to this serial port.

FIGURE 5-4. CONSOLE SERVER SETUP SCREEN

Š

Š

Set the desired Logging Level. This specifies the level of information to be logged and monitored (see Chapter 8). 

Š

Š

Enable or disable Telnet access.

When the Telnet service is enabled on the console server, a Telnet client on a User’s or Administrator’s computer can connect to a 
serial device attached to this serial port on the console server. Telnet communications are unencrypted so this protocol is generally 
recommended only for local or VPN-tunneled connections.
Windows 2000, Windows XP and Windows NT can run telnet from the cmd.exe command prompt.
Windows Vista and later ship with a Telnet client but it is not enabled by default. You can install it as follows.

Š

Š

Click the Start button.

Š

Š

Click Control Panel.

Š

Š

Click Programs.

Š

Š

Click Turn Windows features on or off.

Summary of Contents for LES1516A





























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands