manualshive.com logo in svg

Black Box LES1516A, User Manual

Share
Download
Black Box LES1516A User Manual Download Page 224

224

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 11: NAGIOS INTEGRATION

FIGURE 11-4.

For more on configuring specific NSCA checks, see the sample Nagios configuration described next.

11.2.4 CONFIGURE SELECTED SERIAL PORTS FOR NAGIOS MONITORING 

The individual serial ports connected to the console server to be monitored must be configured for Nagios checks. See Section 5.4 
for details on enabling Nagios monitoring for Hosts that are network connected to the console server.
To enable Nagios to monitor on a device connected to the console server serial port:

Š

Š

Navigate to Serial & Network > Serial Port.

FIGURE 11-5.

Š

Š

Click Edit on the serial Port # to be monitored.

Š

Š

Check the Enable Nagios checkbox.

Š

Š

Specify the Host Name of the device on the upstream server.

Š

Š

Check the checkboxes of the Nagios checks to be run on this port.
Serial Status monitors the handshaking lines on the serial port. Check Port monitors the data logged for the serial port.

Summary of Contents for LES1516A





























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands