manualshive.com logo in svg

Black Box LES1516A, User Manual

Share
Download
Black Box LES1516A User Manual Download Page 192

192

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 9: POWER, ENVIRONMENT AND DIGITAL I/O

9.1.2 RPC ACCESS PRIVILEGES AND ALERTS 

Set PDU and IPMI alerts using Alerts & Logging > Alerts (see Chapter 8). Assign users to access and control outlets on each RPC 
via Serial & Network > User & Groups (see Chapter 5).

9.1.3 USER POWER MANAGEMENT 

The Power Manager allows users and administrators to access and control configured serial- and network-attached PDU power 
strips, and servers with embedded IPMI processors or BMCs.

Š

Š

Select Manage > Power.

FIGURE 9-6.

Š

Š

Select the Target power device to be controlled.

Š

Š

If the RPC supports outlet level control, select the Outlet to be controlled.

Š

Š

Initiate the desired Action by selecting the appropriate icon.

FIGURE 9-7.

Summary of Contents for LES1516A





























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands