manualshive.com logo in svg

Black Box LES1516A, User Manual

Share
Download
Black Box LES1516A User Manual Download Page 320

320

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 16: ADVANCED CONFIGURATION

When an IPMI password is changed on a remote machine with the IPMIv1.5 lan interface the new password is sent across the 
network as clear text. This could be observed and then used to attack the remote system. It is thus recommended that IPMI 
password management only be done over IPMIv2.0 lanplus interface or the system interface on the local station.
For IPMI v1.5, the maximum password length is 16 characters. Longer passwords are truncated. For IPMI v2.0, the maximum 
password length is 20 characters. Longer passwords are truncated.

Commands

TABLE 16-12. IPMI COMMANDS

 COMMAND

NOTES

help

This can be used to get command-line help on ipmitool commands. It may also be placed at the end of commands 
to get option usage help.

raw

Send a RAW IPMI request and print response

lan

Configure LAN Channels

chassis*

Get chassis status and set power state

event

Send pre-defined events to MC

mc

Management Controller status and global enables

sdr

Print Sensor Data Repository entries and readings

sensor

Print detailed sensor information

fru

Print built-in FRU and scan SDR for FRU locators

sel

Print System Event Log (SEL)

pef

Configure Platform Event Filtering (PEF)

sol

Configure IPMIv2.0 Serial-over-LAN

isol

Configure IPMIv1.5 Serial-over-LAN

user

Configure Management Controller users

channel

Configure Management Controller channels

session

Print session information

exec

Run list of commands from file

set

Set runtime variable for shell and exec

*chassis commands: status, power, identify, policy, restart_cause, poh, bootdev.
chassis power commands: status, on, off, cycle, reset, diag, soft.
More details on ipmitools are availalbe at the project site, https://sourceforge.net/projects/ipmitool/.

Summary of Contents for LES1516A





























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands