Black Box LES1516A User Manual Download Page 133

Page: 133 / 348

133

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

Enter the Default Lease time in seconds.

Enter the Maximum Lease time in seconds.

FIGURE 6-21.

Lease times are the number of seconds a dynamically assigned IP address is valid before the client must request it again.

Click Apply.
The DHCP server issue IP addresses sequentially from a specified address pool or pools.

Click Add in the Dynamic Address Allocation Pool section.

FIGURE 6-22.

Enter the DHCP Pool Start Address.

Enter the DHCP Pool End Address.

Click Apply.

CHAPTER 6: FIREWALL, FAILOVER AND OOB ACCESS

Summary of Contents for LES1516A




























































































































































































































































































































































Search results

Summary of Contents for LES1516A

Reviews:

Brands by name

Popular brands

Black Box LES1516A, User Manual

Search results

Summary of Contents for LES1516A

Reviews:

Brands by name

Popular brands