150
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
FIGURE 7-15. EDIT SDT HOST SCREEN
Click SSH or Telnet to access the gateway’s command line console.
To enable SDT access to the gateway console, you must configure the console server to allow port forwarded network access to
itself.
As of firmware v3.3, this can be done using the console server’s Management Console.
Navigate to System > Firewall.
Click the Service Access tab.
Enable SSH Command Shell access on the Network Interface and on any Out-of-band Interfaces.
With firmware versions prior to v3.3, do the following.
Navigate to Serial & Network > Network Hosts.
Click Add Host.
In the IP Address/DNS Name field enter 127.0.0.1.
This is the loopback address.
Enter Loopback in the Description field.
Remove all entries under Permitted Services except for those that will be used in accessing the Management Console (80/http or
443/https) or the command line (22/ssh or 23/telnet).
Click Apply.
By default, Administrators have gateway access privileges. For Users to access the gateway Management Console, the required
access privileges must be granted.
Navigate to Serial & Network > Users & Groups.
Click Add User.
Enter a Username, Description and Password.
Select 127.0.0.1 from the Accessible Host(s) pop-up menu.
Click Apply.
CHAPTER 7: SSH TUNNELS AND SDT CONNECTOR
