manualshive.com logo in svg

Black Box LES1516A, User Manual

Share
Download
Black Box LES1516A User Manual Download Page 143

143

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

Š

Š

Click OK.
The new gateway will appear in the SDT Connector home page.

NOTE:  For an SDT Connector user to access a console server and then access specific hosts or serial devices connected to that 

console server, that user must first be set up on the console server, and must be authorized to access the specific ports on 
the specific hosts (see Chapter 6). Only these permitted services will be forwarded through by SSH to the Host. All other 
services (TCP/UDP ports) are blocked.

7.2.3 AUTO-CONFIGURE SDT CONNECTOR CLIENT WITH THE USER’S ACCESS PRIVILEGES 

Each user on the console server has an access profile which has been configured with those specific connected hosts and serial 
port devices the user has authority to access, and a specific set of the enabled services for each of these. This configuration can 
be auto-uploaded into the SDT Connector client.

Š

Š

Select File > New Gateway (or click the New Gateway icon).

Š

Š

Click Retrieve Hosts.

SDT Connector will:

Š

Š

Configure access to network connected Hosts that the user is authorized to access and will, for each of these Hosts, set up the 

services (for example, HTTPS, IPMI2.0) and the related IP ports being redirected.

FIGURE 7-6. RETRIEVE HOSTS SCREEN

Š

Š

Configure access to the console server itself. This is shown as a Local Services host.

Š

Š

Configure access with the enabled services for the serial port devices connected to the console server.

CHAPTER 7: SSH TUNNELS AND SDT CONNECTOR

Summary of Contents for LES1516A





























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands