manualshive.com logo in svg

Black Box LES1516A, User Manual

Share
Download
Black Box LES1516A User Manual Download Page 62

62

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 4: SYSTEM CONFIGURATION

4.7.9 RUNNING A RESTORE OR UPDATE IN SECURE RECOVERY MODE  

For a firmware update to run in secure mode (that is, to run over the https protocol) /etc/scripts/backup-url must find two 
certificate files in an attached USB storage device.
The first required file is ca-bundle.crt. The second required file is whichever one of the following files is found first:

Š

Š

client-AABBCCDDEEFF.pem

AABBCCDDEEFF is the MAC address of the console server’s primary network interface.

Š

Š

client-MODEL.pem

MODEL is the (vendor class) model name in lowercase, truncated to before the first hyphen.

Š

Š

lient.pem

See Section 4.7.4 for how to create these files.
NOTE:  If both ca-bundle.crt and a suitable *.pem file are found, URLs offered by insecure protocols (such as http, ftp, tftp and ftps) 

are skipped. Once an unconfigured console server is in secure recovery mode, the firmware and configuration files needed 
to return it to operational status must be offered via https.

Summary of Contents for LES1516A





























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands