manualshive.com logo in svg

Black Box LES1516A, User Manual

Share
Download
Black Box LES1516A User Manual Download Page 116

116

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

6.6 CELLULAR MODEM CONNECTION

The LES1600 family of advanced console servers support internal cellular modems.
These modems first need to be installed (as documented in Sections 6.6.1 through 6.6.3) and then set up to validate they can 
connect to the carrier network (as documented in Sections 6.6.4 and 6.6.5).
They then can be configured for operation in Always-on cellular router or OOB mode, or in Failover mode (as documented in Section 
6.7).

6.6.1 CONNECTING TO A GSM HSUPA/UMTS CARRIER NETWORK 

Console server models denoted with -R have an internal GSM modem that will connect to any major GSM carrier globally.
NOTE:  Before powering on any -R model console server, install the SIM card provided by your cellular carrier and attach the external 

aerial. The console server has two cellular status LEDs. The SIM LED on top of the unit should go on solid when a SIM card 
has been inserted and detected.

Š

Š

Navigate to System > Dial.

Š

Š

Click the Internal Cellular Modem tab.

CHAPTER 6: FIREWALL, FAILOVER AND OOB ACCESS

Summary of Contents for LES1516A





























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands