manualshive.com logo in svg

Black Box LES1516A, User Manual

Share
Download
Black Box LES1516A User Manual Download Page 144

144

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

FIGURE 7-7. SERVICES SCREEN

NOTE:  Retrieve Hosts auto-configures all classes of user whether they are members of user, admin, some other group, or no group. 

SDT Connector will not auto-configure the root. We recommend that root only be used for initial config and for adding an initial 
admin account to the console server.

7.2.4 MAKE AN SDT CONNECTION THROUGH THE GATEWAY TO A HOST 

Š

Š

Select the host to be accessed.

Š

Š

Click the Service to be used in accessing that host.
The SSH tunnel to the gateway is established, the appropriate ports redirected through to the host, and the appropriate local client 
application is launched pointing at the local endpoint of the redirection.

The SDT Connector client can be configured with an unlimited number of gateways and each gateway can be configured to port 
forward to an unlimited number of locally networked Hosts. Similarly there is no limit on the number of SDT Connector clients who 
can be configured to access the one Gateway. Nor are there limits on the number of Host connections that an SDT Connector client 
can concurrently have open through the one Gateway tunnel.

FIGURE 7-8. 

CHAPTER 7: SSH TUNNELS AND SDT CONNECTOR

Summary of Contents for LES1516A





























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands