178
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 8: ALERTS, AUTO-RESPONSE AND LOGGING
8.3.3 PERFORM RPC ACTION
Select Perform RPC Action as the Add Trigger Action.
Enter a unique Action Name.
Set the Action Delay Time.
Select a power Outlet.
Specify the Action (Power On, Power Off, or Cycle) to be performed.
Click Save New Action.
8.3.4 RUN CUSTOM SCRIPT
Select Run Custom Script as the Add Trigger Action.
Enter a unique Action Name.
Set the Action Delay Time.
Create a script file to execute when this action is triggered.
Enter the Script Executable’s file name. For example /etc/config/action.sh.
Set the Script Timeout. This is the maximum run-time for the script. Set this at 0 for unlimited time.
Enter any Arguments that are to be passed to the script.
Click Save New Action.
8.3.5 SEND SNMP TRAP
Select Send SNMP Trap as the Add Trigger Action.
Enter a unique Action Name.
Set the Action Delay Time.
NOTE: The SNMP Trap actions are valid for Serial, Environmental, UPS and Cellular data triggers.
Click Save New Action.
8.3.6 SEND NAGIOS EVENT
Select Send Nagios Event as the Add Trigger Action.
Enter a unique Action Name.
Set the Action Delay Time.
Edit the Nagios Event Message text to display on the Nagios status screen for the service.
Specify the Nagios Event State (OK, Warning, Critical, or Unknown) to return to Nagios for this service.
Click Save New Action.
NOTE: To notify the central Nagios server of Alerts, NSCA must be enabled under System > Nagios and Nagios must be enabled for
each applicable host or port
