manualshive.com logo in svg

Black Box LES1516A, User Manual

Share
Download
Black Box LES1516A User Manual Download Page 101

101

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

FIGURE 5-38. EDIT CONNECTION SCREEN

Š

Š

Enter the IP address or DNS name (for example, the dynamic DNS address) of the VCMS.

Š

Š

Enter the Password that you configured on the VCMS as the Call Home Password.

Š

Š

Click Apply.

FIGURE 5-39. CALL HOME CONNECTION

This initiates the Call Home connection from the console server to the VCMS, creating an SSH listening port on the VCMS, and setting the 
console server up as a candidate.
Once the candidate has been accepted, an SSH tunnel to the console server is redirected back across the Call Home connection. The 
console server becomes a Managed Console Server and the VCMS can connect to and monitor it through this tunnel.

CHAPTER 5: SERIAL PORT, HOST DEVICE AND USER CONFIG

Summary of Contents for LES1516A





























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands