manualshive.com logo in svg

Black Box LES1516A, User Manual

Share
Download
Black Box LES1516A User Manual Download Page 186

186

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 8: ALERTS, AUTO-RESPONSE AND LOGGING

FIGURE 8-17. CONSOLE SERVER SETTINGS SCREEN

8.6.3 IP SUBNET-BASED VLAN 

The console server supports optional logging of access to and communications with network attached Hosts.
For each Host, when you set up the Permitted Services that are authorized to be used, you also must set up the level of logging that 
is to be maintained for each service.

Š

Š

Specify the logging level that is to be maintained for that particular TCP/UDP port/service, on that particular Host:

TABLE 8-4. LOGGING LEVEL OPTIONS

 LOGGING LEVEL

DESCRIPTION

  0

Turns off logging for the selected TCP/UDP port to the selected Host.

  1

Logs all connection events to the port

  2

Logs all data transferred to and from the port.

Š

Š

Click Add.

Š

Š

Click Apply.

8.6.4 AUTO-RESPONSE EVENT LOGGING 

Š

Š

Navigate to Alerts & Logging > Auto-Response.

Š

Š

In the Global Auto-Response Settings section, check the Log Events check box.

Š

Š

Click Save Settings.

8.6.5 POWER DEVICE LOGGING 

The console server also logs access and communications with network attached hosts and maintain a history of the UPS and PDU 
power status.

Summary of Contents for LES1516A





























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands