Black Box LES1516A User Manual Download Page 173

Page: 173 / 348

173

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 8: ALERTS, AUTO-RESPONSE AND LOGGING

rm /etc/config/customscript.0
exit 7
fi
touch /etc/config/customscript.0
exit 1

FIGURE 8-7.

Enter the Script Executable file name. For example /etc/config/test.sh.

Set the Check Frequency. This is the time, in seconds, between re-running the script.

Set the Script Timeout. This is the maximum run-time for the script.

Specify the Successful Return Code. An Auto-Response is triggered if the return code from the script is not this value.

Enter Arguments that are to be passed to the script. For example, with a web page html check script, these Arguments might specify

the web page address/DNS and user logins.

Check Save Auto-Response.

Summary of Contents for LES1516A




























































































































































































































































































































































Search results

Summary of Contents for LES1516A

Reviews:

Related manuals for LES1516A

Brands by name

Popular brands

Black Box LES1516A, User Manual

Search results

Summary of Contents for LES1516A

Reviews:

Related manuals for LES1516A

Brands by name

Popular brands