149
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
FIGURE 7-14. EDIT CLIENT SCREEN
Some clients are launched in a command line or terminal window. The Telnet client, for example. In this case, Path to client
executable file is telnet and the Command line format for client executable is cmd /c start %path% %host% %port%.
Click OK.
7.2.8 DIAL-IN CONFIGURATION
If the client is dialing into the console server’s Local/Console port, set up a dial-in PPP link.
Configure the console server for dial-in access, following the steps in Section 6.1.
Set up the PPP client software on the remote computer, following the steps in Chapter 6.
Once you have a dial-in PPP connection established, set up the secure SSH tunnel from the remote computer to the console server.
7.3 SDT CONNECTOR TO MANAGEMENT CONSOLE
SDT Connector can also be configured for browser access to the gateway’s Management Console and for Telnet or SSH access
to the gateway’s shell. For these connections to the gateway itself, you must configure SDT Connector to access the gateway by
setting the console server up as a host, and then configuring the appropriate services.
Launch SDT Connector on your PC.
Assuming you have already set up the console server as a Gateway in your SDT Connector client (with username, password, etc.),
select this newly added Gateway and click the Host icon to create a host.
Alternatively, select File > New Host.
Enter 127.0.0.1 as the Host Address.
Optionally add details in the Descriptive Name and Description/Notes fields.
Click OK.
Click the HTTP or HTTPS services icon to access the gateway’s Management Console.
CHAPTER 7: SSH TUNNELS AND SDT CONNECTOR
