Biotek Synergy HTX, Operator'S Manual

Page: 38 / 184

16
|
Chapter 2: Installation
2.
Using no sharp tools,
open the box containing the dispense module. Remove the
two reagent bottle holders and the cardboard shipping insert. Lift out the module
and place it on a level surface.
Shipping insert
Inner
shipping box
Dispense
module
Figure 6: Unpacking the dispense module’s inner shipping box
3. Open the accessories box. Remove and identify its contents (see
Figure 7
on the
next page):
•
2 inlet tubes, packaged in plastic cylinders
• 4 outlet tubes, packaged in plastic bags
• 2 syringes, packaged in boxes
•
1 priming plate
•
2 reagent bottles
• 1 injector tip priming trough (small, plastic cup)
• 1 plastic tool storage bag with fastener strips
•
2 metal thumbscrews
•
1 stylus (wire) packaged in a small plastic cylinder
• 1 dispense module cover
• 1 dispense module cable
Reagent
bottle holders
(2)
Dispense
module
Cardboard insert
Inner shipping
box
BioTek Instruments, Inc.