Specifications
3500/42 Operation and Maintenance
212
EIPP Monitor
Frequency Response:
Direct Filter:
Gap Filter:
Accuracy:
-3 dB at 15.6 Hz.
-3 dB at 0.41 Hz.
Within
±
0.33 % of full scale typical,
±
1 %
maximum.
Acceleration Frequency Response
The following table represents the frequency ranges for the 3500/42 under
different filtering options. Resources used for filtering are assigned based
on channel pairs. It is possible to select different filtering options for the two
channels of a channel pair. However, the frequency response for both
channels will be limited to the worst case frequency response of the
individual channels. If added frequency range is required, the 3500/42 can
be configured as a two-channel monitor (use channels 1 and 3). This lets
you combine the resources normally used for filtering of two channels and
use them for one. See page 48
Dual Acceleration
Filter Quality:
High-Pass:
Low-Pass:
Quality:
4-pole (80 dB per decade, 24 dB per
octave).
4-pole (80 dB per decade, 24 dB per
octave).
Within ±0.33 % of full-scale typical, ±1 %
maximum. Exclusive of filters.
Dual Velocity
Frequency Response:
Filter Quality:
High-Pass:
Low-Pass:
Quality:
See page 58
2-pole (40 dB per decade, 12 dB per
octave).
2-pole (40 dB per decade, 12 dB per
octave).
Within ±0.33 % of full-scale typical, ±1 %
maximum. Exclusive of filters. For the
Velomitor:
Full Scale 0-0.5: ±3 % typical.
Full Scale 0-1.0: ±2 % typical.
Full Scale 0-2.0: ±1 % typical.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
