Beijer Electronics korenix JetWave 3220v3 Series, User Manual

Page: 89 / 141

JetWave 3220v3/3420v3 Series User Manual
Page 80
4.3.2
Basic Settings
Normally, you can connect the LTE Gateway to the ISP cellular network without configuring LTE
setting. However, in some countries, before the LTE gateway can access the ISP's cellular data
network, you may need to enter the APN settings, User Name, Password, Authentication type…
on the device. You can use this page to configure the parameters.
Disable 3G/Cellular Interface: You can disable the LTE interface manually.
APN: Every ISP has a specific APN (Access Point Name) assigned to its cellular network. The
system can read this name from the SIM card. You can also find this setting by contacting your
ISP to know this. Once you failed to connect your LTE cellular network, this is the first way you
can check. Please check with your ISP to know the APN and correctly input the setting through
the page.
User Name: The user name for the LTE connection. Normally, this is provided by your ISP.
Password: The password for the LTE connection. Normally, this is provided by your ISP.
Authentication Type: You can select CHAP or PAP per your ISP request. Normally, this is
provided by your ISP.
Reconnection Delay: Reconnection Delay time is the delay time for each LTE Retry.
Reconnection Retries: This is the times of Reconnection Retry. While LTE is not connected, the
system will retry the connection according to the Reconnection Delay time and Retry times.
WAN Redundancy: The product can support WAN redundancy feature.
In default, the setting is Fixed Cellular , that means you can use LTE and Ethernet WAN port at