Beijer Electronics korenix JetWave 3220v3 Series, User Manual

Page: 32 / 141

JetWave 3220v3/3420v3 Series User Manual
Page 23
2.5
LED Indicator
The following table indicates the LED of your device.
LED Indication LED Indication
P1
Power 1 Status
Green ON = System ON
R2
Status of the Radio Number 2
Green ON = Radio 2 is activated *Note
P2
Power 2 Status
Green ON = System ON
PoE
IEEE 802.3at PoE+ Status (Eth 1)
Green ON = Powered from the 802.3at
PSE Switch. *Note 1
OFF: 802.3af or Not power by PoE
DO
Digital Output Status
Red ON = The Relay is ON. It may
indicate the alarm of specific events.
R1
Radio 1 Status
Green ON = Radio 1 is activated
SYS
System Status
Green ON = The system is activated.
Eth 1
Ethernet Port 1 Status.
Green ON = Eth 1 is Link Up.
Green Blinking = Eth 1 is Activating
Eth 2
Ethernet Port 2 Status.
Green ON = Eth 2 is Link Up.
Green Blinking = Eth 2 is Activating
S1
Serial Port 1 Status (JetWave 3420 Only)
Green Blinking = Serial port is transmitting data
Red Blinking = Serial port is receiving data
Note 1: PoE LED is only applied to the IEEE 802.3at PoE+. Current PoE LED can’t indicate
IEEE802.3af PoE, this is known limitation of the LED display.
Note 2: R2 is the radio number. R1 is the first WIFI Radio, R2 is the 2 nd WIFI Radio, LTE Radio.
In JetWave 3220v3, the R2 indicates the 2 nd WIFI radio of the JetWave 3220v3.
In JetWave 3420v3, the R2 indicates the LTE radio of the JetWave 3420v3.